fbpx

Keeprite furnace error code 7

Uncategorized0 comments

Keeprite furnace error code 7

Error code 7 only occurs on the rarest of occasions. Like any furnace issue, it is best to turn off the power and call a professional to take care of the problem.

Keeprite furnaces are known for their reliability and exceptional durability. They have one of the highest customer satisfaction ratings among all furnaces today. However, when it does happen, some furnace owners experience Keeprite furnace error code 7 when doing routine maintenance or regular inspections.

A specific error code of a keeprite furnace is 7. This error code allows users to know how to fix the issue. In this article, we will discuss other causes of the same problem and how you can figure out which one is causing the error.

The fan motor in a Keeprite furnace is typically programmed for speeds between 1500 and 1800 rpm. If your fan speed falls below 1400 rpm or exceeds 2000 rpm, it might be because your pressure switch or your flame sensor has failed.

A possible cause of an error code 7 might be a faulty pressure switch, but you should not just blindly replace it because that could lead to another error code. Instead, inspect all wiring around the pressure switch controls to see if any unusual problems with the wiring could be causing the problem.

Keeprite has experienced a failure with the furnace. First, they should research the problem to find out what caused it. If the problem is not mechanical, then they can replace the part.

With Keeprite’s error code 7, it is important to contact customer service and follow their specific instructions:

*Check furnace controls’ heating switches and lights;

*Unplug the power cord from the wall outlet;

*Turn the power off at the circuit breaker box;

*Contact an authorized service company for assistance (for mechanical issues) or replacement parts (for any electrical issues).