Carrier fault codes 6 flashes

Carrier furnace0 comments

Carrier fault codes 6 flashes

Carrier fault codes are a series of flashes that will be different depending on the problem. There are several interpretations of these flashes, and each one has a specific meaning.

1 flash indicates an open line or no voltage coming into the diagnostic tool. 2 flashes indicate low voltage or low battery power to diagnose the vehicle. 3 flashes means there is no signal from the vehicle’s computer to the diagnostic tool, and 4 flashes mean there is a problem with the wiring harness in which it cannot communicate with the vehicle’s computer.

5 flashes can usually be solved by clearing any stored error codes in your car, and 6 flashes indicates a major problem that needs to be addressed as soon as possible.

Every carrier has its own set of fault codes that it flashes when the system is not working correctly.

The first digit indicates the mode in which the system is operating. If a code flashes for more than 3 seconds, then it is possible that a parameter has been set incorrectly and needs to be corrected.

On most systems, 6 flashes indicates an input fault or a problem with the external sensors that measure flow, temperature, pressure and other variables.

When the Carrier fault codes 6 flashes, this means that there is a problem with the thermostat. The Carrier fault codes 6 flashes displays different messages depending on which type of error occurs.

“Inspections, Installations, Repairs & Maintenance”