Carrier furnace error code 126

Carrier furnace0 comments

Carrier furnace error code 126

Carrier furnace error code 126 is a failure of the heat exchanger fan. The problem is not too serious and it can be corrected by replacing the heating coil with an authorized Carrier part.

Carrier is a leading manufacturer of heating, ventilating and air conditioning (HVAC) products.

Carrier furnaces are known for their efficiency and durability. However, there are times when furnace error code 126 appears on the panel display or is displayed on the error code list. When this is the case, it’s important to take a look at the parts manual and understand what might be wrong with your furnace.

The error code 126 can be caused by a number of issues including but not limited to:

– Defective electronic control board

– Defective inducer motor

– Defective inducer blower resistor

– Defective inducer blower discharge muffler

Carrier furnace error code 126 is most common problem with Carrier gas furnaces because of the high probability of the problem.

Carrier Furnace Error Code 126 is a very common issue. This problem occurs when there is a short circuit in the primary or secondary heat exchanger. The heat exchanger causes too much heat to be put out and, as a result, it causes the motor to be severely damaged due to overheating.

“Inspections, Installations, Repairs & Maintenance”